On older models of firearms, there were many different styles of field stocks that were in existence.
On older models of firearms, there were many different styles of field stocks that were in existence. Using the 320 grit sandpaper, sand stock to a smooth finish. Using 320 grit paper, again sand the stock with the grain, removing fibers that were created by the whiskering process.
If your stock has a recoil pad, it should be removed at this point. Don't know how much they'll be used, but nice none the less. Nonetheless, if Boyd approaches an area of technical support in the mid-30s, Sheidlower might contemplate a re-entry. If you have a bigger barrel you will need to relieve some wood out of the barrel channel. At the discretion of our Review Board, we will repair or replace any defective or mislabeled product.
Allow to dry for 24 hours, remove tape, and reinstall recoil pad. Product and shipping charges subject to change without notice. All Auctions are conducted in Pacific Standard Time. The trigger came from the factory at about 4 lbs and with just a tiny bit of creep. If heavy build finish is desired, repeat steps 15 thru 18.